We've overhauled our rig-storage solutions recently, and this new Rig-Safe is the result. Its robust and compact, yet it will hold up to 60 pre-tied rigs! As youd expect, weve tweaked the design to include several neat upgrades compared to the traditional rig box. The magnetic locking system ensures that the box cant come open in transit, and is easy to open, even in the wet and cold of a UK winter! The rigs are secured by hooking over a ridged aluminium bar that prevents tangles, and the hook end of the box is slightly recessed to protect those hook points. The RigSafe comes with 30 standard single pins and 15 double pins, which have been designed to secure hook links that havent been finished with a loop or swivel, allowing you to leave final adjustments to rig length until youre in the swim. The case is finshed in a carpy soft-touch rubber too!
Our neoprene finger stalls are streamlined, snug and offer unrivalled protection when going for the big cast, especially with braid. They are available in small, large and extra large versions.
This little gadget has been designed to make casting even quite long zigs child's play. By simply popping your hook onto the magnetic plate, it will be hold there securely until you let fly, meaning that the hook cannot become tangled and the line can be kept off the floor. Simple, but you'll wonder how you lived without one!
These distance sticks make fishing accurately child’s play. Rather than simply produce a me-too product, we decided to produce the best sticks that we could. That meant teaming up with JAG Products, who engineer to the highest standards we could find!
Each stick is a thing of beauty, with special grooves to prevent the line from spilling off, causing the dreaded bird’s nest. They also come supplied with a T-Bar, which can be used to drive the specially designed excavator auger point into even the hardest of ground.
Integrated spirit levels in the top of each stick allow for perfect positioning, and pop out to reveal a cavity, which accepts an isotope to allow you to wrap-up, even at night!
DropZone Marker Float,
Marker floats are a massive part of our armoury and finding particular spots can often be the difference between a red-letter day and a blank. Although there were some good marker floats already available on the market we still felt that improvements could be made. The first criterion from Danny was that the flight had to be extremely visible, anyone who has seen Danny fishing will know that he likes to fish at range! It also had to be light and buoyant. This took a while to get right but we achieved exactly what we wanted and the Dropzone Marker float was born. The floats are made from a thin but exceptionally durable plastic and come as a pair in their own tough, protective tube. Each pack comes with two flights.
This clever system will allow us all to reach brand-new heights of neatness in rig creation. The Krimps and Krimp tool have been designed to allow easy rig construction with stiff materials (at the moment we only recommend Hybrid Stiff, Mouth Trap and BOOM. In particular, we're really excited about the potential to create extremely neat loops for chod & Spinner rigs. Not only this, but using Krimps will allow you to create chod rigs that are exactly the same length each and every time. There are two sizes of Krimp available, which have been designed to suit different materials. The smaller one will suit stiff bristle materials like Mouth Trap and stiff coated braids, like our Hybrid Stiff, and the larger one is perfect for really thick materials (like 30lb plus mono or 35lb BOOM). The product development team went to extreme lengths to make sure that the Krimps and Krimp tools were exactly right, having to overcome various problems along the way. The complexity of getting the tool and Krimps just right has meant that this has been a long development, but we're sure that it's been well worth the wait.
This clever system will allow us all to reach brand-new heights of neatness in rig creation. The Krimps and Krimp tool have been designed to allow easy rig construction with stiff materials (at the moment we only recommend Hybrid Stiff, Mouth Trap and Boom). In particular, we're really excited about the potential to create extremely neat loops for chod rigs and Boom sections. Not only this, but using Krimps will allow you to create chod rigs that are exactly the same length each and every time. There are two sizes of Krimp available, which have been designed to suit different materials. The smaller one will suit stiff bristle materials like Mouth Trap and stiff coated braids, like our Hybrid Stiff, and the larger one is perfect for really thick materials (like 30lb plus mono or the 35lb Boom). The product development team went to extreme lengths to make sure that the Krimps and Krimp tools were exactly right, having to overcome various problems along the way. The complexity of getting the tool and Krimps just right has meant that this has been a long development, but we're sure that it's been well worth the wait.
Ok, there are plenty of scissors already on the market, but we felt we could still improve on these. All the versions currently available are made in a dull, carpy colours, meaning that they are often lost on the bank. Not these babies! The handles have been manufactured in a bright Korda green, so if you misplace these you need to go to Specsavers! It goes without saying that the blades are sharp enough to effortlessly cut through all the rig materials that you use.
These precision-engineered drills are perfect for creating popular balanced presentations like the KD rig and Muzza rig. There are two drills in the range, 8mm and 6mm, which will cater for a range of hook baits, including standard baits, smaller boilies and tiger nuts. The tips of the drill bits have been specially engineered to allow baits to be drilled without cracking. Each drill comes supplied with six quality cork sticks that fit the drilled holes perfectly. We also supply replacement packs of cork sticks, each of which contain 10 cylinders.
Baiting tools are an important part of any carp angler's kit, some people are happy to use one needle for everything. However, seeing as we are self-confessed perfectionists, we like to use exactly the right tools for the job. For that reason we have designed these little babies. We have produced the needles in mega-bright colours to minimise the chance of misplacing them. How many times have you dropped your baiting needle onto the grass and lost it? A lot I would guess. However, this is now completely eliminated with the super-bright handles on the Korda range of needles.
Most anglers appreciate that the inspiration to develop a new product comes from being faced with a recurring problem, and here at Korda Developments we've recently seen an increase in the need for a no-fuss hook bait storage facility, which is why we decided to develop this little gem, the Infuza. Boosted hook baits have been a popular technique in carp fishing for many years; the use of oils, flavour additives and bait soaks have seen a resurgence in the last couple of years and the use of such products in our own fishing really did highlight the need for a product that satisfied our requirements. We needed to design something robust and easy to use, which allowed excess liquid to drain from the surface of the hook baits, ensuring an even coating. The internal tray allows the baits to sit above the glug, but be coated with a simple shake of the pot. Lastly, we wanted to design a quality piece of tackle. We think that the Infuza does everything that an angler requires from this type of product. It is available in two sizes, large and small.
Long gone are the days of spending hours in the kitchen mashing up potent-smelling fishmeal boilies in a food blender. Why? Because the Krusha is here. There have been many devices over the years developed to crush up baits, such as the vegetable chopper, but most couldn't handle the rigours of day-to-day carp angling. The blades would often bend, break or blunt and at times it could take hours to grind up a kilo of boilies, let alone tiger nuts or pellets. The principle behind the Krusha was simple. We wanted to devise something that could crush up literally any bait out there within seconds, whether that be tiger nuts, pellets or air-dried boilies. So, the Krusha was born. Created as an ultra-strong and robust device the Krusha uses its sharp teeth to work together in motion to demolish anything that you put before it. Finished in a carpy, olive green colour and available in both large and small, the Krusha is perfect for the day-to-day carp angler. To use, simply fill the Krusha on the section that states FILL', place the other section over the top and begin to twist. The more vigorously you twist, the smaller the items will be. Grinding pellets to a mere dust creates a mighty fine bag mix and if you're a fan of solid bags, look no further. The boilie crumb will also be a fantastic addition to a stick mix or spod concoction. Experiment with literally anything and you could create the ultimate mix!
What a response we've had to the launch of this gem. It's the brother to the Krusha and allows you to smash out loads of perfectly chopped boilies in double-quick time. There are three Kutters in the range that suit 16mm, 20mm and 25mm baits. To use them, simply depress the button, remove the plunger and drop in a few baits. Then use the plunger to force the baits down the Kutter, whereupon the inner blade slices them perfectly and it's practically effort-free! The resulting halved baits are superb in spod mixes and won't roll off the spot at all, due to their shape which is a bonus when targeting sloping gravel humps, marginal slopes or moving water.
The Eazi-Stik has a long, straight shaft which allows the boilie to pick up more speed before it exits. The faster the boilie travels, the further it travels. Field-testing this length generated maximum speed without increasing the effort required to move the stick through the air. Made from ultra-light polycarbonate plastic makes the Eazi-Stik incredibly light, making baiting effortless. It greatly reduces fatigue on your arm, which is a major bonus because most sticks kill your arm. Take care though, accidentally hitting the ground on the follow through can damage this stick.
Keep it out of direct sunlight in the heat of summer too, as prolonged exposure to temperatures of 25 degrees can warp the shape. The bend in the end of the Eazi-Stik is essential to its performance. This long, J-shaped bend increases back spin on the boilie and the backspin 'lifts' the boilie in flight. greatly increasing distance. The broken texture of the rubberised handle creates the right amount of friction with your hand to ensure a firm grip - This stops the stick twisting in your hand on the downward stroke, keeping the baits straight. Great effort was put into keeping the handle as slim as possible - this substantially reduces fatigue on your forearm, which is a problem found in most other sticks. The handle was made 8" long to allow one or two-handed grip.
Large Rig Safe,
This is the ultimate rig storage system for anyone looking for more capacity than the existing Mini Rig-Safe offers, or needs somewhere to store pre-tied rigs of 12 inches or longer. It will hold up to 90 rigs, thanks to one side of it featuring double-ended storage, and the clever magnetic locking system means that it will never come open accidentally during transit, but is very easy to open when you want to, even with cold hands!
The Large Rig-Safe features a specially machined, ridged aluminium bar to retain the hooks and keep them razor sharp until you’re ready to use them, and it has been shaped so that if you’re using a curved shrink tube kicker it retains its shape if you store them point upwards. It comes supplied with 30 standard pins to hold swivels or loops in place on the high density foam inner, and prevent tangles, or if you prefer to tie your rigs to the right length when you arrive at the water, then you can make use of the 20 double pins which will keep those in place, rather than in a knotted mess! It is made from high impact plastic, meaning that it is very strong, and is finished in soft-touch rubber, which not only feels nice in your hands but allows a good grip on it even when wet. The outside is marked up to 12 inches or 30 cm, so you can tie your rigs to exactly the length that you require.