Rig Bits 

Showing 1 - 20 of 20 items
  • £3.99
    Quick and easy rig changes are a necessary part of carp angling today. The Link Loop has been specially designed to replace the need for an overhand loop in the end of your hook link. The obvious advantage is the increased strength due to the use of a grinner or blood knot used to tie the link loop to the rig, especially when using monofilament or coated hook link materials. The Link Loop will fit both sizes of the Stik Klip as well as the Kwik Link. The low-diameter steel and teardrop design is easily pulled through all of the Funnel Web System bags, using a baiting needle. As with all our metal products the Link Loops are finished with a non-reflective coating to give the best camouflage possible.

    SHOP NOW

  • £2.99
    The Korda Safe Zone Helicopter Sleeve has been specifically designed to cover a Korda Kwik Link when it is attached to a Dark Matter Leader or leadcore when using a helicopter or chod style setup. It stops tangles and grips the Kwik Link thanks to its special rubber compound.

    SHOP NOW

  • £3.65
    The Maggot Klip makes baiting your rig with maggots easier than ever. Simply open the clip, thread your maggots onto it and close it up again! The Klips are available in a range of different sizes to suit your needs. You can therefore thread on as many maggots as you wish. The clasp fastens tightly onto the front of the Klip making it safe and easy to utilise. They are fantastic for outwitting pressured carp throughout the summer and winter period. We've also been experimenting with seeds of hemp on the Klips and it works extremely well when bites are hard to come by or when you're fishing over a spodded concoction of particles. They come available in X Small, Small, Medium And Large.

    SHOP NOW

  • £3.25
    From bait attachment, to combi-rig construction, the Micro Rig Swivel has a host of rig applications. It's perhaps most widely used sliding on the shank of a hook, forming the blow-back element of many rigs. Crucially, it has the same non-reflective coating that our other rig components are blessed with, eliminating any glint that might otherwise spook feeding fish.

    SHOP NOW

  • £3.65
    This little family of products will find favour with a host of anglers. They allow the hook link to be changed in an instant, which is a huge help when time is of the essence! They're available in and in two sizes, size-11 and size-8, and in standard and ring-swivel variants, which allows you to use them with lead clips, or on helicopter systems.

    SHOP NOW

  • £3.65
    PTFE coated ring swivels that have a host of rig-making applications! They are most often used to connect the hook link to the lead system. The size-eight ring swivel fits our lead clips perfectly, giving your rigs an extra degree of movement. The size-11 ring swivels are most often used on helicopter rigs.

    SHOP NOW

  • £3.65
    The Ring Klip has been specially designed for the easy attachment of hook links. The unique design allows greater movement thanks to the ring section of the clip. It can be easily attached to a swivel and used with a lead clip or fished between the beads on a helicopter-style setup.

    SHOP NOW

  • £3.65
    Korda Rig Rings are a crossbreed of the best parts of modern day metal technologies. The silky smooth PTFE coating enhances the effectiveness of rigs incorporating a ring, especially when coupled with Korda PTFE-coated hooks. Korda rig rings have been specially designed to help the angler create a variety of different rigs for the ever-changing demands required to catch carp today. Available in four sizes and finished in black to aid concealment, the presentation options are almost endless.

    SHOP NOW

  • £2.75
    Korda Silicone Tubing is perfect for holding the hair in place on the hook, stopping tangles and helping the hook to catch hold more efficiently! It is available in 0.5mm and 0.7mm bore and in two colours, weedy green and muddy brown.

    SHOP NOW

  • £3.15
    The humble swivel completes the whole rig set up and since it is almost the last connection between you and the carp it needs to be reliable. We always bought swivels from the same source, until our suppliers' supplier merged with a new company. The stocks were mixed and some were not as good quality so we immediately set about sourcing an alternative. They say that from every adversity comes an equal or greater benefit and in this case the swivels we located came from Japan - arguably the best swivel manufacturers in the world. They matched the size of the originals exactly, improved the breaking strain and reliability, and made them in a lovely dull grey tint. This was an improvement that entailed only a marginal increase in price - 10 per cent over 10 years! The swivels have round eyes because they are stronger than diamond eyes, if this were not the case then hooks would be made with diamond eyes! They fit just about everything that we make including - the Inline Leads, Lead Clips, Running Rigs, Shok Beads and Rubbers, what more can we say!

    SHOP NOW

  • £2.75
    In 2003 we released the increasingly popular Run Rig kits, after this we received a massive demand for the silicone sleeves to be sold separately. We found that by using a small piece to cover the swivel on the lead it kept everything neat and tidy but more importantly offered much better camouflage. They are also the perfect size to fit over our Kwik-links and Stik-Klip. We started off manufacturing them in weedy green but have now extended the range by adding a silty brown version. No other company produces such a wide range of colours because no other company has seen how much difference it can make. We shall continue to strive for better ways of fooling the most wary of carp. To fit, thread piece of line through eye of swivel or Kwik-link and then through sleeve, wet metal item with saliva and pull on sleeve. Sleeves may need to be cut down for some applications.

    SHOP NOW

  • £2.85
    A compact tungsten-rubber weight, designed to slide onto your hook link and pin it to the lake bed. Moistening the hooklength will allow the Sinkers to slide along the hook link much easier. The great thing about a Sinker is that it stays in position, rather than flying off on the cast like putty can. Available in three colours to camouflage into the lake bed and three separate sizes.

    SHOP NOW

  • £3.50
    These silicone sleeves feature a sharp taper at one end, which helps to smooth the setup and prevent tangles. They are available in muted weedy green and muddy brown colours to help blend with the lake bed seamlessly.

    SHOP NOW

  • £3.65
    These clever bits of metalware allow you to change hook links or leads in the blink of an eye. Danny says: I now use the Kwik Links for all of my fishing. I attach the link to the swivel that is held inside the inline or lead clip. I then tie an overhand loop in the end of the hook link making sure I tighten the knot fully, especially when I use the Hybrid Stiff material. It is actually best to tighten the knot over steam to ensure that it beds down fully. I slide a Tapered Silicone Sleeve onto the hook link before clipping it onto the Kwik Link. I then slide the silicone up over the Kwik Link to stop any chance of the hook link coming free during the cast. I can now change hook links within seconds and I don't have to pull the swivel in and out of the lead clip. This prevents any wear and tear and so extends the working life of each clip. The longer the swivel stays in the firmer the grip becomes. This ensures the lead will pull off the clip if it gets snagged during the fight.

    SHOP NOW

  • £3.45
    These clever swivels have been designed to make chod-rig fishing even easier. They feature a rounded crook rather than a conventional eye, into which you can clip a looped chod. To create the loop, you can either tie an overhand loop or crimp a loop into the end. These loops can then be 'clicked' into the loop and won't come out unless you want to change a rig. The swivels are PTFE coated, which prevents light glinting off, potentially spooking feeding carp.

    SHOP NOW

  • £2.75
    These little rubber hook beads fit tightly onto the shank of all of our hook patterns, and can be used to create a number of effective presentations. They’re perfect for use with rig rings, to create blow-back rigs such as the Withy Pool rig, or even variations of the all-conquering chod rig. They come supplied on easy-to use sprews, which each old 20 hook beads. The beads are weedy green colour, which helps them blend over most lake beds.

    SHOP NOW

  • £4.15
    We've designed Kickers to help you make rigs that flip, turn and catch hold much more easily. To create a bottom-bait presentation that will guarantee optimum hooking, simply slide a rubber Kicker over the eye of your hook and you're good to go! Ali Hamidi and Tom Dove wanted to create something totally different with these Kickers, and decided to make them available in bright yellow, pink, red and white, as well as the normal green and brown. Their thinking was that adding more colour to the orbit of the hook bait would help grab the carp's attention even faster! If you're somewhat more old fashioned, like Danny, then you can still choose your Kickers to blend with the lake bed. Available in small, medium and large sizes to fit hooks from 10 to 4.

    SHOP NOW

  • £3.99
    Extra-long, slim tail rubbers that have been designed for use with Solidz PVA bags and inline leads. Once filled, the bag can be moistened and twisted around the long rubber, securing it in place for even the longest casts.

    SHOP NOW

  • £2.75
    This extra stiff shrink tubing does exactly what it says on the package! This super stiff shrink tubing opens up new possibilities for rig mechanics.

    SHOP NOW

  • £2.85
    Korda Shrink Tube is perfect for improving the hooking efficiency of any hook by curving the hooklink inwards. It shrinks down to 1/3 of its original size to form a really neat presentation. Specifically designed colours to match the bottom of any lake bed that you will be fishing.

    SHOP NOW

Showing 1 - 20 of 20 items